Aluminium profiles slot 8 in grid 30 – 30x30 and 60x30, item compatible
I-type profiles
Profiles 5
Profiles 6
Profiles 8
Profiles 8X
Profiles 10
Profiles 12
Profile 830 30x30 1N, natural
Profiles 8 30 with closed grooves are suitable for weight-optimised assemblies of all kinds. With the closed groove side, visually appealing and low-maintenance constructions can be realised. The grooves and core holes of Profiles 8 30 are designed for M8 screws.Delivery length 6030 mm
Profile 830 30x30 2N90, natural
Profiles 8 30 with closed grooves are suitable for weight-optimised assemblies of all kinds. With the closed groove side, visually appealing and low-maintenance constructions can be realised. The grooves and core holes of Profiles 8 30 are designed for M8 screws.Delivery length 6030 mm
Profile 830 30x30, natural
Profiles 8 30 are particularly suitable for weight-optimised assemblies. The grooves and the core holes of the profiles 8 30 are designed for M8 screws.Delivery length 6030 mm
Profile 830 60x30 2N, natural
Profiles 8 30 with closed grooves are suitable for weight-optimised assemblies of all kinds. With the closed groove side, visually appealing and low-maintenance constructions can be realised. The grooves and core holes of Profiles 8 30 are designed for M8 screws.Delivery length 6030 mm
Profile 830 60x30, natural
Profiles 8 30 are particularly suitable for weight-optimised assemblies. The grooves and the core holes of the profiles 8 30 are designed for M8 screws.Delivery length 6030 mm
Profile 830 R30-90°, natural
Profiles R are especially suitable for the construction of angled protective bonnets, racks and other assemblies. The closed outer surface is visually appealing and easy to clean.Delivery length 6030 mm
Technische Daten
Gilt für alle Profile dieser Baureihe. Abweichungen einzelner Varianten stehen auf der jeweiligen Produktseite.
Nut 8, Raster 30 mm · Item kompatibel
| Slot width | 8 mm |
|---|---|
| Modular dimension | 30 mm |
| Tapping drill | M8 |
| Slot pull-out force | F=500 N |
| Material | Al Mg Si 0.5 F25, artificially aged |
| Surface | natural anodised E6/EV1 |
| Tolerances | to EN 12020-2 |
| Supply form | Bars up to 6,000 mm, cut to the millimetre |
| Compatible with | Item (Nut 8, Raster 30 mm) |
Verfügbare Querschnitte
Alle Varianten dieser Baureihe auf einen Blick — Querschnitt, Nutenausführung, Bauart und Nutauszugskraft je Profil.
| Cross section | Slots | Type | Slot pull-out force | Product |
|---|---|---|---|---|
| 60x30 mm | 1 side closed | heavy | F=500 N | To the profile |
| 30x30 mm | Radius profiles | heavy | F=500 N | To the profile |
| 30x30 mm | 1 side closed | heavy | F=500 N | To the profile |
| 30x30 mm | 2 sides closed 90° | heavy | F=500 N | To the profile |
| 30x30 mm | Open grooves | heavy | F=500 N | To the profile |
| 60x30 mm | Open grooves | heavy | F=500 N | To the profile |
Systemkompatibilität
Was zur Profiles 8-30 passt – und was nicht. Der Zusatz „kompatibel" bleibt bewusst: Item ist eine fremde Marke, wir führen kein Originalteil.
Was passt
- The complete slot 8 accessory range: T-slot nuts M4 to M8, cover and edging profiles for slot 8
- Connectors and brackets in grid 30 – not the grid 40 connectors of series 8
- End caps 30x30 and 30x60
- Common cross-sections of this series at a glance: 30x30 mm
- For the same slot in grid 40 see slot 8 in grid 40
Was nicht passt
- Connectors and connector plates from grid 40 – same slot, offset hole pattern
- T-slot nuts for slot 5, 6, 10 and 12 – different slot geometry
- Bosch compatible accessories from series 30-8: identical nominal size, different slot profile
Maßlich kompatibel zu Item Profiles 8-30. Kein Originalteil von Item, keine Vertriebs- oder Lizenzbeziehung. Profile mit anderer Nutbreite sind nicht kompatibel.
Anwendungsbeispiele
Item-kompatible Profile im Einsatz
Compact fixtures with slot 8 accessories
When the design has to stay small but the familiar slot 8 accessories must not change.Add-ons to existing slot 8 machinery
Brackets, consoles and extensions mounted with the T-slot nuts you already have.Light frames with many mounting points
Many attachment points on a small cross-section – for sensors and media routing, for example.Radii and rounded edges
Radius profile R30-90° takes the sharpness out of edges at walk-up and operator positions.Item Profile: häufig gestellte Fragen und Antworten
Hier finden Sie Antworten auf die häufigsten Fragen zu unseren Item kompatiblen Aluprofilen. Von der Maßgleichheit über die richtige Nutbreite bis zu Material und Zuschnitt.
Bleibt eine Frage offen, hilft Ihnen unser Team persönlich weiter. Sie erreichen uns Mo. bis Fr. von 9 bis 17 Uhr unter 09452 9334-0.
What is the difference from series 8?
Which accessories fit and which do not?
Need help putting your setup together?
We are happy to help.
Our team advises you personally on selecting and combining your profiles and components – from the first idea to the finished construction.
(Mon – Fri 9am–5pm)