Bosch compatible strut profiles 50x50 – slot 10, grid 50
B-type profiles
Profiles 20-6
Profiles 30-8
Profiles 40-10
Profiles 45-10
Profiles 60-10
Profile 100x100 light natural-10
The profiles in pitch 50 with groove 10 are suitable for assemblies of all kinds. Due to the different profile geometries, the material requirements can be adapted to the application. The grooves are designed for M8 screws.Delivery length 6030 mmCompatible with Bosch 3 842 993 171
Profile 50x100 light natural-10
The profiles Raster 50 with groove 10 are suitable for assemblies of all kinds. Due to the different profile geometries, the material requirements can be adapted to the application. The grooves are designed for M8 screws.Compatible with Bosch 3 842 993 16
Profile 50x150 light natural-10
The profiles in pitch 50 with groove 10 are suitable for assemblies of all kinds. Due to the different profile geometries, the material requirements can be adapted to the application. The grooves are designed for M8 screws.Delivery length 6030 mmCompatible with Bosch 3 842 993 196
Profile 50x50 light natural-10
The profiles in pitch 50 with groove 10 are suitable for assemblies of all kinds. Due to the different profile geometries, the material requirements can be adapted to the application. The grooves are designed for M8 screws.Delivery length 6030 mmCompatible with Bosch 3 842 993 156
Technische Daten
Gilt für alle Profile dieser Baureihe. Abweichungen einzelner Varianten stehen auf der jeweiligen Produktseite.
Nut 10, Raster 50 mm · Bosch kompatibel
| Slot width | 10 mm |
|---|---|
| Modular dimension | 50 mm |
| Tapping drill | M8 |
| Slot pull-out force | F=7.000 N |
| Material | Al Mg Si 0.5 F25, artificially aged |
| Surface | natural anodised E6/EV1 |
| Tolerances | to EN 12020-2 |
| Supply form | Bars up to 6,000 mm, cut to the millimetre |
| Compatible with | Bosch (Nut 10, Raster 50 mm) |
Verfügbare Querschnitte
Alle Varianten dieser Baureihe auf einen Blick — Querschnitt, Nutenausführung, Bauart und Nutauszugskraft je Profil.
| Cross section | Slots | Type | Slot pull-out force | Product |
|---|---|---|---|---|
| 50x50 mm | Open grooves | light | F=7.000 N | To the profile |
| 50x100 mm | Open grooves | light | F=7.000 N | To the profile |
| 50x150 mm | Open grooves | light | F=7.000 N | To the profile |
| 100x100 mm | Open grooves | light | F=7.000 N | To the profile |
Systemkompatibilität
Was zur Profiles 50-10 passt – und was nicht. Der Zusatz „kompatibel" bleibt bewusst: Bosch ist eine fremde Marke, wir führen kein Originalteil.
Was passt
- T-slot nuts B for slot 10 in M4, M5, M6 and M8 – zinc plated, heavy-duty and as spring T-slot nut
- Connectors and brackets in grid 50
- Cover and edging profiles for slot 10
- All four cross-sections with each other – 50x50, 50x100, 50x150 and 100x100 share the same grid
- Common cross-sections of this series at a glance: 50x50 mm, 100x100 mm
Was nicht passt
- T-slot nuts for slot 6 and slot 8 from the smaller B-type series – different slot geometry
- Connectors from grid 40, 45 or 60 – same slot width, offset hole pattern
- item compatible slot 10 accessories from I-type series 10 – different slot profile
Maßlich kompatibel zu Bosch Profiles 50-10. Kein Originalteil von Bosch, keine Vertriebs- oder Lizenzbeziehung. Profile mit anderer Nutbreite sind nicht kompatibel.
Anwendungsbeispiele
Bosch-kompatible Profile im Einsatz
Heavy-duty frames in the 50 grid
For structures planned in the metric 50 grid that should not be converted to 45.Columns and posts
100x100 as a load-bearing column for platforms, gantries and hall structures.Large base frames
50x150 as a stiff longitudinal beam in plant frames with wide support distances.Plant with high payload
Mounts for heavy tooling, drives and vessels.Bosch Profile: häufig gestellte Fragen und Antworten
Hier finden Sie Antworten auf die häufigsten Fragen zu unseren Bosch kompatiblen Aluprofilen. Von der Maßgleichheit über die richtige Nutbreite bis zu Material und Zuschnitt.
Bleibt eine Frage offen, hilft Ihnen unser Team persönlich weiter. Sie erreichen uns Mo. bis Fr. von 9 bis 17 Uhr unter 09452 9334-0.
When grid 50 instead of grid 45?
What is the largest cross-section?
Need help putting your setup together?
We are happy to help.
Our team advises you personally on selecting and combining your profiles and components – from the first idea to the finished construction.
(Mon – Fri 9am–5pm)