Alle Produkte
The case closure is a locking system which is bolted to the door frame and frames. During assembly, a gap of 1-3 mm is to be provided. For mounting on the profile no drilling is required. The attachment of the latch closure takes place from the front.
The case closure is a locking system which is bolted to the door frame and frames. During assembly, a gap of 1-3 mm is to be provided. For mounting on the profile no drilling is required. The attachment of the latch closure takes place from the front.
The latch lock is a locking system that is screwed onto door frames and racks. When mounting, a gap of 1-3 mm must be provided. No drill holes are required for mounting on the profile groove. The latch lock is fastened from the front.
The stop bracket is fixed to the door frame and forms an overrun wedge and an end stop. The door gap is 4.5 mm at the stop bracket.
To construct sealed, flush and opaque closing doorsWith elastic sealing lip, conceals door gap
To construct sealed, flush and opaque closing doorsWith elastic sealing lip, conceals the door gap
Double ball catches are used for the guard locking of swing and sliding doors. Quick installation is possible due to slotted holes. M5 screws and sliding blocks are required for fastening.
Double Ball used for the interlock of swing and sliding doors. Through elongated holes fast installation is possible. When fastening screws and nuts M5 are needed.
Swivel and fixed castors are used on assemblies and frames of all kinds. They have very good rolling characteristics and are highly resilient. The castors are resistant to many environmental influences. Especially for use in electrical production, many castors are also available in ESD versions. The ESD version has a discharge resistance of 110 Ohm.
Swivel and fixed castors are used on assemblies and frames of all kinds. They have very good rolling characteristics and are highly resilient. The castors are resistant to many environmental influences. Especially for use in electrical production, many castors are also available in ESD versions. The ESD version has a discharge resistance of 110 Ohm.
PA hinges are suitable for lighter doors and flaps. They are equipped with an anti-rotation device that engages in the groove. Panel elements that are installed directly with PA hinges must be machined with holes.
PA hinges are suitable for lighter doors and flaps. They are equipped with an anti-rotation device that engages in the groove. Panel elements that are installed directly with PA hinges must be machined with holes.
PA hinges are suitable for lighter doors and flaps. They are equipped with an anti-rotation device that engages in the groove. Surface elements that are installed directly with PA hinges must be machined with holes.
Erweitern Sie Ihre Arbeitsplatzmöglichkeiten mit dem Doppelschwenkarm 8 695 . Dieser innovative Arm besteht aus zwei Schenkeln, die durch ein Gelenk miteinander verbunden sind, um den Abstand zum Bediener flexibel anpassen zu können. Das stabile Anschlussgelenk ist für die Verwendung von Profilen der Baureihe 8 geeignet und der Doppelschwenkarm sollte ausschließlich an vertikal verlaufenden Profilnuten montiert werden. Mit einer Reichweite von ca. 695 mm bietet dieser Doppelschwenkarm eine enorme Flexibilität und ermöglicht doppelte Ausschwenklängen. Die maximale vertikale Last, die er tragen kann, beträgt 80 N. Investieren Sie in den Doppelschwenkarm 8 695 und profitieren Sie von einer höheren Produktivität und einem verbesserten Arbeitskomfort.
Exakte Positionierung in allen Richtungen! Die vormontierten Sätze kombinieren die Schwenkarme mit der passenden Höhenverstellung. Dies erlaubt, die Arbeitshöhe in einer vertikalen Systemnut 8 einfach anzupassen. Die Montage am Profil wird durch die Sätze vereinfacht.
Dank der vormontierten Sätze können Schwenkarme einfach und präzise in jeder Richtung positioniert werden. Die Sätze enthalten sowohl die Schwenkarme als auch die passenden Höhenverstellungen, die in eine vertikale Systemnut 8 eingehängt werden können. Die Montage am Profil wird durch die fünf vormontierten Sätze erheblich vereinfacht.
Der Doppelschwenkarm 8 80 695 schwer ist die ideale Lösung für Anwendungen, bei denen eine große Reichweite und hohe Traglast gefordert sind. Die verstärkten Gelenke des Arms sind in der Lage, vertikale Lasten von bis zu 250 N sicher zu tragen. Sie lassen sich präzise in jeder gewünschten Position schwenken und arretieren, sodass Werkzeuge und Arbeitsmaterialien immer bequem erreichbar sind.
Mit den vormontierten Sätzen können Sie die Schwenkarme zusammen mit der passenden Höhenverstellung verwenden, um die Arbeitshöhe in einer vertikalen Systemnut 8 präzise zu justieren. Dies ermöglicht eine genaue Positionierung in jeder Richtung. Die Montage am Profil wird durch bereits vormontierten Sätze deutlich erleichtert.
Wenn es um das sichere Bewegen von großen Lasten geht, ist der Doppelschwenkarm 8 695 schwer die perfekte Lösung. Dieser robuste Arm besteht aus zwei Gelenken, die mit einem einfachen Schwenkarm verbunden sind. Die beiden Standardgelenke sind für die Verwendung mit allen Profilen der Baureihe 8 geeignet. Der Doppelschwenkarm schwer sollte ausschließlich an vertikal verlaufenden Profilnuten montiert werden. Mit einer Reichweite von ca. 695 mm ist dieser Schwenkarm perfekt für den Umgang mit schweren Lasten geeignet. Er kann eine maximale vertikale Last von 140 N tragen und ist damit in der Lage, auch die größten Lasten zu bewegen. Das Anschlussgelenk kann um 360° geschwenkt werden, was die beidseitige Nutzung eines Schwenkrahmens ermöglicht. Investieren Sie in den Doppelschwenkarm 8 695 schwer und sorgen Sie für eine sichere und effiziente Handhabung von großen Lasten.
Steel clamp connector for the assembly of stable push-in pipe clamp connections
Steel clamp connector for the assembly of stable push-in pipe clamp connections
Linear slides are built with storage units. They are used in pairs, 1 each eccentric (this is set free of play) and opposite 1 centric. In order to minimize wear, a wiper lubrication system must be installed on every bearing unit.
Linear slides are built with storage units. They are used in pairs, 1 each eccentric (this is set free of play) and opposite 1 centric. In order to minimize wear, a wiper lubrication system must be installed on every bearing unit.