Go to homepage
€0.00*

Roller guides


Our modular roller guides are characterised by easy assembly, high load capacity, any stroke length and a fast travel speed.

Roller profiles

For the construction of individual bearing units up to 3000 mm long
in combination with the matching track rollers and bolts

Shaft clamp profiles

These use standard profiles as the basis of the linear guide.
Assembly by simply snapping them into place.
Filter
Roller Profile 8 D14, natural
Roller Profile 8 D14, natural

Artikel-Nr: PI-1413 SZ

Zuschnitt max. 6000 mm

The track roller profile is used to create bearing units D14 in suitable length up to 6000mm. Cut to size max. 6000 mmCompatible with item 0.0.426.02

€43.18*
Roller Profile 8 D14, natural
Roller Profile 8 D14, natural

Artikel-Nr: PI-1413 SN6000

1 Stück à 6000 mm

The track roller profile is used to create bearing units D14 in suitable length up to 6000mm.

€347.00*
Roller Profile 8 D14, natural
Roller Profile 8 D14, natural

Artikel-Nr: PI-1430 SZ

Zuschnitt max. 6000 mm

The track roller profile is used to create bearing units D14 in suitable length up to 6000mm. Cut to size max. 6000 mmCompatible with item 0.0.426.02

€43.18*
Roller Profile 8 D14, natural
Roller Profile 8 D14, natural

Artikel-Nr: PI-1430 SN6000

1 Stück à 6000 mm

The track roller profile is used to create bearing units D14 in suitable length up to 6000mm.

From €250.98*
Details
Shaft clamp Profile 8 D14, natural
Shaft clamp Profile 8 D14, natural

Artikel-Nr: PI-1535 SZ

Zuschnitt max. 6000 mm

The shaft clamping profile is used to hold the guide shaft d14. The shaft is pressed into the profile groove by pressing in the shaft clamping profile. The shafts are secured by a DIN6325 cylindrical pin.

€5.03*
Shaft clamp Profile 8 D14, natural
Shaft clamp Profile 8 D14, natural

Artikel-Nr: PI-1535 SN6000

1 Stück à 6000 mm

The shaft clamping profile is used to hold the guide shaft d14. The shaft is pressed into the profile groove by pressing in the shaft clamping profile. The shafts are secured by a DIN6325 cylindrical pin.

From €27.36*
Details
Shaft clamp Profile 8 D14, natural
Shaft clamp Profile 8 D14, natural

Artikel-Nr: PI-1535 SN3000

1 Stück à 3000 mm

The shaft clamping profile is used to hold the guide shaft d14. The shaft is pressed into the profile groove by pressing in the shaft clamping profile. The shafts are secured by a DIN6325 cylindrical pin.

From €16.10*
Details
Shaft clamp profile 8 D25, natural
Shaft clamp profile 8 D25, natural

Artikel-Nr: PI-1537 SN3000

1 Stück à 3000 mm

The shaft clamp profile is used to hold the guide shaft d25.The shaft clamp profile is screwed on with S1397 countersunk screws M6x16 DIN 7991 and NI-1040 slot nuts M6, galvanised-8.The holes for the screw connection are 200 mm apart.

€125.00*
Shaft clamp profile D10, natural-8
Shaft clamp profile D10, natural-8

Artikel-Nr: PI-1536 SZ

Zuschnitt max. 6000 mm

The shaft clamping profile is used to hold the guide shaft d10. The shaft is pressed into the profile groove by pressing in the shaft clamping profile. The shafts are secured by a DIN6325 cylindrical pin. Compatible with item 0.0.442.03

€11.50*
Shaft clamp profile D10, natural-8
Shaft clamp profile D10, natural-8

Artikel-Nr: PI-1536 SN3000

1 Stück à 3000 mm

The shaft clamping profile is used to hold the guide shaft d10. The shaft is pressed into the profile groove by pressing in the shaft clamping profile. The shafts are secured by a DIN6325 cylindrical pin. Compatible with item 0.0.452.23

€34.00*
Shaft clamp profile D25, natural-8
Shaft clamp profile D25, natural-8

Artikel-Nr: PI-1537 SZ

Zuschnitt max. 6000 mm

The shaft clamp profile is used to hold the guide shaft d25. The shaft clamp profile is screwed on with S1397 countersunk screws M6x16 DIN 7991 and NI-1040 slot nuts M6, galvanised-8. The holes for the screw connection are 200 mm apart. Compatible with item 0.0.350.02

€42.50*